[Solved] 100% Working Ways to Fix Register Network Error

Various reasons like bad/no network connection, restricted web server and more will cause the register network error. If you are facing the same situation and fail to register the software, you can check solutions or tips below to fix the issue.

Check the firewall settings

Regularly, you are not allowed to visit our web server due to the firewall setting. In that case, you can add "reg.aiseesoft.com" to your firewall. The network port is "443" and protocol is "https".

Steps to turn off firewall or adjust firewall settings:

Step 1: Open "Control Center" and choose "Network and Internet".

Step 2:  Click on "Windows Firewall" on the bottom-left corner when you enter the "Network and Sharing Center".

Network Settings

Step 3: Click on "Turn Windows Firewall on or off" on the left control.

Windows Firewall

Step 4: When you enter "Customize Settings" window, you can choose to turn off firewall or do other settings.

Customize Settings

Check the network connection

Sometimes, if you are in a poor or no network connection, you will get the register network error. Here you can put your device in a good network and try again.

Turn off the VPN

With the methods above, you can easily fix the register network error. Please contact customer service if you still fail to register the software.

Uninstall the software and then reinstall it

Check the limitations of the registration codes

When meet register network error, check the registration codes are right and available.

Related Articles

CommentAdd your comments to join the discussion here